Interlocking Card Frames

If you want to display your favorite sports or game cards on a wall, BCW Interlocking Card Frames are an amazing system. Each frame has a black border and looks great individually, but it’s the interlocking system that makes these frames special. With the turn of two screws, each frame can connect with a neighboring frame, allowing you to form a grid for however many cards you want to display.

These frames do not use traditional glass panes. Instead, the cards are inserted into the frames while the cards are in BCW Toploaders or BCW Magnetic Card Holders. The card holder performs the function of protecting the card. A BCW Standard Toploader comes with each frame, however you can change that card holder to a thick card toploader, or a BCW Magnetic Card Holder.

The card holder fits in a recess in the back of the frame. Then a backing brace is placed behind the card holder to keep the card holder snug against the front of the frame. The recess in the frame will accommodate all thicknesses of BCW 3×4 Toploaders, and BCW Magnetic Card Holders up to the 180 point size.

To connect one frame to the next frame, place them on a table with their back side facing up. Make sure the hanging holes are all at the top. Hold the two frames next to each other, and screw the frames together by turning the straight slot screws (not the Phillips head screws).

The Interlocking Card Frames can be hung in portrait (vertical), or a landscape (horizontal) format. There are hanging holes in the back of the frames for either orientation. One nail is enough to hang a small group of connected frames if there’s a central hole so the unit will hang level. If multiple nails are needed for a larger group or to keep the frames level, refer to the directions in the package to separate the nails the proper distance.

BCW Interlocking Card Frames are sold in packs of six frames. Additional packs can be purchased so you can build a card frame grid that’s perfect for the amount of cards you want to display.